➢Cross-Country PIC 50 Hours.
➢Instrument Time (Actual or Simulated) 40 Hours.
➢Cross-Country Flight 250 Nautical Miles.
With Specific Instrument Requirements to Complete the Flight.
A good question to ask yourself before you start instrument training is, why do you want this rating? The answers can usually be grouped into three areas. One common answer is that it’s a good thing to have in your pocket just in case you need it. Next is that it’s just another important step to a career in aviation. The third reason is that you want to increase the productivity of your personal or business flying.
There are different ways to obtain training for your instrument rating, and the reason you want the rating may have an effect on the training method that you choose. Should you enroll in a highly regimented FAR Part 141 school? Perhaps a full-time or part-time instructor at your local airport could do the job. Then, there are the accelerated courses. Some of these come to your location and provide intense training in your own airplane. Others require that you travel to their location. These accelerated courses usually have you finished up in 10 to 12 days. What’s the best? That depends on you. The articles included below will provide information to help you decide.
The instrument rating requirements, as specified in 14 CFR 61.65, are summarized here:
A person who applies for an instrument rating must:
➢With Specific. Instrument Requirements to Complete the Flight.
➢Be able to read, speak, write, and understand the English language.
You must have logged the following:
➢At least 50 hours of cross-country flight time as pilot in command. At least 10 of these hours must be in airplanes for an instrument-airplane rating.
➢A total of 40 hours of actual or simulated instrument time on the areas of operation listed in 61.65(c).
➢At least 15 hours of instrument flight training from an authorized instructor in the aircraft category for the instrument rating sought.
For instrument-airplane rating, instrument training on cross-country flight procedures that includes at least one cross-country flight in an airplane that is performed under instrument flight rules.
This flight must consist of:
➢A distance of at least 250 nm along airways or ATC-directed routing.
➢An instrument approach at each airport.
➢Three different kinds of approaches with the use of navigation systems (Example: ILS, VOR, GPS, etc).
➢At least 3 hours of instrument training that is appropriate to the instrument rating sought from an authorized instructor in preparation for the checkride within two calendar months before the examination date. Flight Training.
➢Receive and log flight training from an authorized instructor in an aircraft, flight simulator, or flight training device that represents the aircraft appropriate to the instrument rating sought on the areas of operation listed in 61.65(c).
➢Receive a logbook or training record endorsement from an authorized instructor certifying that you are prepared to take the required practical test.